Introducing the latest addition to Aeromotive’s Gen II Stealth Fuel Tank Lineup, this one is designed specifically for the hugely popular ’67-72 Chevrolet C10 truck. This rear-mount configuration allows builders to easily replace the in-cab fuel tank with a 17-gallon tank behind the rear axle and between the framerails. Aeromotive’s fully assembled Gen II Stealth rear-mount, 17-gallon fuel tank includes an innovative installation kit that provides enthusiasts with a complete tank swap solution. Aeromotive’s highly anticipated tanks are perfect for LS-type swaps and carbureted setups. The Gen II Stealth Tank comes fully assembled in painted steel, complete with Aeromotive’s patented foam and basket assembly to control fuel slosh. Also included are a 0- to 90-ohm fuel level sender and an outlet cap with a -06 ORB outlet and return port. Setting the Aeromotive product apart from the competition, the ’67-72 Chevrolet C10 tank installation kit provides a complete relocation solution. No searching for compatible filler cap components, sending units, or pump assemblies to complete the installation, this comprehensive kit includes a bed-mount fuel filler cap assembly, framerail/filler neck locator drill guides, tank straps, and all mounting hardware. Everything needed is in the box! Installation requires only four holes drilled in the framerails plus a hole pattern in the bed floor for the filler cap. Framerail cutting is not required, in most cases. These exciting new tanks are available with three high-performing Aeromotive fuel pump options: 200, 340, and 450 LPH. The pumps can support up to approximately 800 FWHP when used in conjunction with a gas/EFI/forced induction combination or a maximum of approximately 550 FWHP in an E-85/EFI/forced induction combination.

For more information, contact Aeromotive by visiting aeromotiveinc.com.

Pro’s Pick now offers tucked-in rear bumper bracket kits for ’64-79 F-100 trucks equipped with a Styleside bed and a sport bumper. They are designed to allow the bumper to be installed in the factory mounting position while also affording the adjustability of tucking the bumper, forward and upward, simultaneously, to allow for a cleaner look at the rear of the truck. The brackets are made with 3/16-inch steel and come epoxy primed, ready to be test-fitted, sanded, and painted. These kits include the bracket-to-frame mounting hardware (bumper-to-bracket hardware sold separately), allowing for easy installation using the factory mounting locations on the truck frame.

For more information, contact Pro’s Pick at (888) 607-1115 or visit pros-pick.com.

Auto Metal Direct is thrilled to announce the release of their brand-new fuel filler pipes specifically designed for the ’73-87 Chevy and GMC C/K Squarebody pickup trucks. These state-of-the-art components have been meticulously crafted to ensure precision fitting and optimum performance. The range includes the Fuel Filler Pipe for ’73-78 Chevy GMC C/K pickup truck-Fleetside (PN 891-4073-6), the Fuel Filler Pipe for ’79-83 Chevy GMC C/K pickup truck-Fleetside (PN 891-4079-6), and the Fuel Filler Pipe-Gas for ’84-87 Chevy GMC C/K pickup truck-Fleetside (PN 891-4084-6). For those with diesel engines, Auto Metal Direct has also unveiled the Fuel Filler Pipe-Diesel with 20-gallon tank for ’84-87 Chevy GMC C/K pickup truck-Fleetside (PN 891-4084-6D). These are more than just parts, they represent Auto Metal Direct’s unwavering commitment to quality and the classic truck community.

For more information, contact Auto Metal Direct by visiting autometaldirect.com.