
Feature
IMAGES BY THE AUTHORhe Jersey Shore can be a magical place. It’s a locale where good times are had on a daily basis and memories are forged that can last a lifetime. For years, Eric Faggoli and his family have enjoyed their summers in the sprawling beach town of Avalon, a popular ocean-front destination on the southern coastline of the Garden State. Eric, along with brothers Tom and Kyle, reveled in their summer surf home and regularly partook in the good cheer and all the amenities that the Shore life has to offer.
Overall, the burly Chevy was in reasonably good shape for its age, but it needed some help. The Blazer would end up spending the next few months in their shop getting into safe, “driveable” condition so the family could use it with peace of mind. Though the truck demanded a good amount of work, there was one major upside: “It was a freebie. My dad didn’t pay anything for it, which was obviously a big plus,” Eric continues.
However, things would sadly change for the family. “Three years ago, our father suddenly [died]. My brothers and I knew that we should rebuild the Blazer in honor of our father.” They were in agreement that this old Chevy deserved more than just a quick rebuild. After some searching, they contacted Mark Denlinger at MAD Customs in Boyertown, Pennsylvania. They discussed with Denlinger the possibilities of upgrading the Chevy into a classy beach cruiser. “We knew what we needed the Blazer to be. We wanted a factory-appearing ride with an era-correct look. We didn’t need the latest touch screens, modern chassis, or rollcages. However, we wanted modern mechanical features to make it much safer and usable for the whole family in the summer.” After talking with Denlinger, the brothers decided that MAD Customs were going to be the ones to handle the rebuild.
Before the new powerplant was installed, the crew smoothed the firewall and welded up all unneeded holes to clean up under the hood. After the engine was placed in its new crib, a Holley Performance Mid Mount Accessory Drive was added, along with a set of their retro LS valve covers to hide the coil packs for a smooth look. To keep this rad ride cool on those hot summer days, a Griffin crossflow aluminum radiator was installed and is fed by a pair of electric fans.
The chassis got a lot of love from the crew at MAD Customs. “For the suspension we wanted to go heavy duty. We chose a 1-ton, 14-bolt rear and a 1-ton Dana 60 front axle, both from East Coast Gear supply, and we ordered them complete with 4.56 gears,” Denlinger says. Next, Wilwood disc brakes were installed both front and rear and the calipers were powdercoated gloss black. For the Blazer’s lift, Denlinger went with a BDS kit, which included the premium leaf springs and Fox 2.0 remote-reservoir shocks. The transfer case is a heavy-duty NP205 from Transfer Case Solutions built with their twin stick cable-operated shifter. To help with getting in and exiting this lifted Chevy, MAD installed power side steps from AMP Research with a bracket kit from Hogan Built.
Originally, the plan was to just upgrade the mechanical aspects of the truck and not touch the bodywork and paint, which was in decent shape. However, midway through the project there was a change in heart. “Eric then decided to go all-in and have the paint- and bodywork redone. “Because of my shop being too busy at the time to jump right into the bodywork he chose to outsource that part of the project to Ernest Henry Auto Body in Shoemakersville, Pennsylvania,” Denlinger says. The Blazer ended up spending about a year there getting its new skin of metallic medium blue. Once they finished the bodywork, the Blazer was returned to MAD Customs.
Finishing touches include the wheel and tire combo. Eric decided on the classic polished Pro Comp Xtreme Alloys in size 18×9 at the corners. They are shod in rugged Toyo Open Country R/T Trail tires, 35×12.5-18 all around. American Autowire supplied the Classic Update kit that ties the truck together electrically. All the LED side marker lights and taillights are from United Pacific. The headlights are LED RetroBright from Holley, which give the truck a retro look with modern performance. One of the most important parts of a major build like this is the wheel/tire combo.
As the Blazer build came to an end, Denlinger could see that this project was a complete success on all accounts. “After the transformation, the truck drives more like a late-model truck than an old truck. The LS3 has so much more and is reliable and much more fuel efficient. It still looks similar to the way it was before, but it feels like a completely new vehicle now.” Eric summed it up with one thought: “I love this truck from the perspective of preserving great memories and I can’t wait for the years of use to come.”