Parts Dept
Hurricane A/C & Heater System for 1973-1979 Ford Trucks
1. Hurricane A/C & Heater System for 1973-1979 Ford Trucks
Old Air Products is now offering a new Hurricane A/C Heat & Defrost system for 1973-1979 Ford Trucks. The Hurricane unit mounts to the firewall in place of the original A/C or heater. Fittings pass neatly through the firewall using a custom rubber grommet. Factory-style louvers are included for heater-only trucks or adapters for trucks with original factory louvers. Electronic controls fit neatly into original dash opening. Complete systems include SuperKool Condenser Assembly with receiver/drier and custom tubes for driver or passenger side mounted compressor. A variety of compressor mounting brackets are available to fit many engine applications. Upgrades for polished or chrome compressor are available along with electric fans and trinary pressure safety switch to maximize the A/C system performance.
For more information, contact
Old Air Products, (817) 531-2665
Eddie Motorsports
2. Eddie Motorsports OBS Billet Hinges
Eddie Motorsports presents their all-new billet aluminum hood hinges for 1988-1998 Chevy C/K trucks (will also fit 1992-1999 Blazer/Jimmy, Suburban, and Tahoe/Yukon models), which are in stock and ready to ship. All Eddie Motorsports hood hinges are precision CNC-machined in the USA from high-quality 6061-T6 aluminum, and utilize sealed roller bearings at critical pivot points to ensure consistent, long-lasting action, come with stainless steel nitrogen-filled gas struts for smooth, uniform operation, and include high-quality stainless steel mounting hardware. Aluminum hinges deliver superior strength with great looks. Eliminates the loose factory hinges. Hinges bolt directly into the stock location. Struts available in varying strengths to accommodate light fiberglass or heavy steel hoods. Available in seven different custom finishes.
For more information, contact
Eddie Motorsports at (888) 813-1293 or visit
Premier Street Rod Parts
3. Premier Street Rod Parts 1955-1959 Chevy Hood Brace
Tired of trying to get your Task Force–era Chevy hood to fit right? Premier Street Rod Parts has the answer with its all-new, fully adjustable hood brace kits for 1955-1959 1/2-ton pickups. Fine-tuned corner adjustments can be achieved with four individual heim joint ends supplied with the kit’s fully TIG-welded tubular brace and stainless hardware. Not only does this allow you to once and for all get your truck’s hood looking (and fitting) good on the outside, they make the underside look much better, too!
For more information, contact
Premier Street Rod Parts and Manufacturing at (800) 447-5000.
PerTronix Flame Thrower MAGX2 8mm Spark Plug Wires, Black Ceramic Boot
4. PerTronix Flame Thrower MAGX2 8mm Spark Plug Wires, Black Ceramic Boot
PerTronix’s new MAGX2 black ceramic boot spark plug wires are constructed from two layers of high-temperature silicone and rated up to 600 degrees F while the ceramic spark plug boot acts as the primary protection against direct heat, withstanding up to 2,000 degrees F. Available for universal and GM LS applications, they feature a carbon impregnated fiberglass center (primary current path) with a spiral-wound stainless steel alloy (secondary current path) for reliability and redundancy. Additionally, they feature low 500-ohm per foot resistance; 8mm silicone jackets to resist high temperatures, moisture, oils, and chemicals; EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage breakdown; and fiberglass reinforcing braid for added strength and flexibility. Kits include distributor boots and terminals for both male- and female-style distributor caps.
For more information, visit
Petronix at
Aldan American OBS Road Comp  Series Suspension Kits
5. Aldan American OBS Road Comp Series Suspension Kits
Made in the USA, Aldan C1500 suspension kits include everything you need to fully convert your factory front suspension to adjustable coilover shocks and springs with adjustable rear shock absorbers. Aldan’s Road Comp Series suspension kits include ride-height adjustable coilovers that allow up to 2 inches of lowering capability on front suspensions. Road Comp Series kits also include adjustable rear shock absorbers designed to work with rear flip kits and lowering springs. Improve your classic Chevy or GM truck’s stance and handling performance today with Aldan’s new Road Comp Series bolt-on suspension kits. (PN 300172 shown can be used with factory or aftermarket control arms.)
For more information, contact
Aldan American at (310) 834-7478 or visit
BedWood and Parts In-House Manufactured Angle Strips
6. BedWood and Parts In-House Manufactured Angle Strips
BedWood’s innovation doesn’t stop at the wood itself—they carry that creativity over to their 100 percent USA-made angle strips manufactured right in their Hopkinsville, Kentucky, facility. They have taken the unsightly hump out of the angle strip that attaches to the bed side of stepside pickup trucks. By utilizing modern manufacturing technology they can now offer an angle strip that will allow you to incorporate a clean edge to smooth up your inner bed sides, providing a sleek custom appearance. Made from 430 BA magnetic stainless (or a carbon cold rolled steel), BedWood angle strips are ultrahigh quality, and each kit can come either punched, per factory specs, or unpunched for custom applications, not to mention are compatible with any application that requires them.
For more information, contact
BedWood and Parts at (877) 206-9663 or visit